Installing The Paper Tray; Installing The Ink Cartridges - Epson Stylus Pro 4880 Setup Manual

Installing the paper tray

Insert the paper tray in the slots at the front of the
printer.

Installing the ink cartridges

w
Warning:
The ink cartridges are self-contained units.
Under ordinary use, ink does not leak from the
cartridges. If ink does get on your hands, wash
them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with
water.
Note:
❏ The ink cartridges packaged with your printer are
partly used during the initial setup. In order to
produce high-quality prints, the print head in your
printer will be fully charged with ink. This one-off
process consumes a quantity of ink and therefore
these cartridges print fewer pages compared to
subsequent ink cartridges.
❏ Initial ink charging requires approximately
8 minutes.
❏ Each slot can hold a particular color of ink. Be sure
to install the ink cartridges in the correct slots
according to the ink mode you choose.
❏ The following illustration uses EPSON Stylus Pro
4880/4880C. Slot # 5 to 8 are not available on
EPSON Stylus Pro 4450.
4
❏ The right ink compartment of EPSON Stylus Pro
4450 cannot be opened. Do not press the cover too
hard; otherwise, you may break it.
1 2 3 4
No. EPSON Stylus Pro
4880/4880C
#1 Matte Black or
Photo Black
#2 Cyan
#3 Vivid Magenta
#4 Yellow
#5 Light Black
#6 Light Cyan
#7 Vivid Light Magenta
#8 Light Light Black
1. Turn on the printer by pressing the Power
button. After a short time NO INK CRTG appears
on the LCD panel.
2. Open the ink compartment cover(s) by
pushing it.
5 6 7 8
EPSON Stylus Pro 4450
Matte Black
Cyan
Magenta
Yellow
-
-
-
-