Package Contents; For Your Safety; Installation - BenQ WiT MindDuo AR19 D User Manual

Package Contents

Check the packaging for the following items. If any is missing or damaged, please contact the place
of purchase immediately.
• WiT MindDuo lamp x 1
• Pedestal base (or desk clamp) x 1
• The illustrations in this guide are for your reference only and may look different from the
appearance of the actual product.
• Actual accessories (e.g., pedestal base or desk clamp) included in the package will depend on
the model you purchase. The desk clamp is also provided as separate purchase. Please contact
your dealer for availability.

For Your Safety

• Use only the supplied power adapter and connect only to suitable outlet power (100-240V AC,
50-60 Hz). Otherwise the lamp will fail to work normally or result in a fire hazard.
• In order to prevent any damages to the lamp, do not hang or place any objects on the lamp.
• Route the power cord so as to avoid it from being walked on or pinched by items placed upon
or against it.
• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may topple over and
result in damages.
• If the lamp will not be used for a long period of time, unplug it from the power outlet.
• The light source contained in this luminaire can't be replaced.
CAUTION

Installation

Pedestal Base
1. Place the pedestal base on a solid, flat and stable
surface.
2. Insert the shaft on the pedestal base into the hole on
the end of the lamp arm [Figure
secure it by tightening the screw [Figure
• Be sure to tighten the screw to secure the pedestal
base to the lamp arm. Otherwise the pedestal base will
detach from the lamp arm and result in damages or
personal injuries if the lamp is unwittingly moved by
grasping the lamp arm.
• Use only the pedestal base supplied in the packaging to
ensure that the lamp can stand firmly.
3. Connect the power cord to the power input socket
and power adapter [Figure
power outlet [Figure
plugged, the lamp will automatically turn ON.
Upon receiving power from the power outlet, the lamp's
built-in presence sensor will start to calibrate
automatically, and the process will take approximately 1
minute. Please DO NOT turn off the lamp during the
calibration process. You can start using the lamp when
the calibration is complete.
• In case of the following situations, unplug the lamp from the power outlet
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
- When the outer casing of the lamp is broken
- When there are strange odors coming from the lamp
- When the LED light source flickers
- When the insulation of the lamp's wiring is damaged or frayed, and the metal
strings inside can be seen
• Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
• This lamp is designed for indoor use only. Do not use it outdoors.
• Never disassemble the lamp or remove any components from it, as doing so
may result in accidents and will void the product warranty.
] and plug it into a
]. When the power is
• Power adapter x 1
• Power cord x 1
A
] and then
].
English 1