Step 12 Connect Drain Line; Drain Line Installation - Electrolux EIDW1805KS Installation Instructions Manual

STEP 12 CONNECT DRAIN LINE
FOLLOW ALL LOCAL CODES AND ORDINANCES
The drain hose molded end will fit 5/8", 3/4" or 1"
diameter connections on the air gap, waste tee or
disposer. Cut on the marked line as required for
your installation.
• If a longer drain hose is required, add up to 42"
of length for a total of 10 ft. to the factory in-
stalled hose. Use 5/8" or 7/8" inside diameter
hose and a coupler to connect the two hose
ends. Secure the connection with hose clamps.
• Secure the drain hose to the air gap, waste tee
or disposer with clamps.
NOTE: TOTAL DRAIN HOSE LENGTH MUST
NOT EXCEED 10 FEET FOR PROPTER DRAIN
OPERATION..
Installation Instructions
10

DRAIN LINE INSTALLATION

• Connect drain line to air gap, waste tee or dis-
poser using either previously determined method.
Method 1 - Air gap with waste tee or disposer
Waste Tee Installation
Method 2 - High Drain loop with waste tee or disposer
Waste Tee Installation
IMPORTANT
drain line to disposer check to be sure that drain
plug has been removed. DISHWASHER WILL NOT
DRAIN IF PLUG IS LEFT IN PLACE.
TIP: Avoid unnecessary service call charges.
Always be sure disposer drain plug has been
removed before attaching deishwasher drain hose
to the disposer.
Disposer Installation
Figure W
Disposer Installation
Figure X
–
When connecting