Standby L52 User Manual

LAMP L52 USER MANUAL
L52 Blue, Amber ECE R65 Class 2 / L52 Red ECE R65 Class 1
VERSIONS
45257021, L52 Blue Horizontal
45257022, L52 Blue Vertical
45267021, L52 Red Horizontal
45277021, L52 White Horizontal
45287021, L52 Amber Horizontal
45287022, L52 Amber Vertical

CONFIGURATION

For configurations of the Sync-mode and Flash Pattern follow further
instructions. NB! If STEP 2 and STEP 3 is performed incorrect one will have
to restart from STEP 1.
1
Connect the POWER SUPPLY.
2
Wait at least 1 second and at most 6 seconds.
3
Connect the WHITE cable to ground (chassi) during at least 2 seconds.
4
Once in the configuration mode, a flash sequence will start, which
indicates the setting selected. To change the setting, follow the
instructions shown below Sync-mode & Flash Pattern.
5
Exit the configuration mode by cutting the POWER SUPPLY.
Reset to Factory Settings (default)
While in the configuration mode, connect the BLUE and the WHITE wire to
ground (chassi) during at least 2 seconds. The reset is confirmed with a bright
steady light for approximately 2-3 seconds.
Connections configuration
BLACK
RED
WHITE
BLUE
Sync-mode and Flash Pattern
In the configuration mode you can adjust and set the desired settings for
sync-mode and flash pattern. The settings are indicated by a series of flash
sequences. Count the number of flashes to find out the chosen settings
( see table 2).

Sync-mode

For desired Sync-mode, connect the BLUE wire to ground (chassi).

Flash Pattern

For desired Flash Pattern, connect the
WHITE wire to ground (chassi).
NB! Each time the selected wire is connected to ground the
next version of SYNC-MODE or FLASH PATTERN is activated.
If the wire is kept connceted to ground a flash sequence indicating
the selected settings is shown, where Bright flashes indicates
the settings of Sync-mode and "Blank" flashes indicates the
selected Flash Pattern.
Sync-mode #1
Sync-mode #1 & Flash Pattern #1
Flash Pattern #1
Table 2 Selectable Functions
VERSION FLASH
#1 x1
#2 x2
#3 x3
#4 x4
STANDBY AB Nohabgatan 12C
Sweden SE-461 53 Trollhättan

APPROVALS

Mounting / Montage / Montering Mounting / Montage / Montering
1 1
2 2
Connections / Anschluss / Inkoppling Connections / Anschluss / Inkoppling
To Chassis Ground
Power Supply
To +10-30VDC
Activate configuration mode, choose Flash Pattern
Choose sync-mode
BLACK / SCHWARZ / SVART BLACK / SCHWARZ / SVART
To Chassis Ground / bis Chassis-massis To Chassis Ground / bis Chassis-massis
/ Till jordpunk (chassi) / Till jordpunk (chassi)
RED / ROT / RÖD RED / ROT / RÖD
To +10-30VDC / bis +10-30VDC / Till +10-30VDC To +10-30VDC / bis +10-30VDC / Till +10-30VDC
WHITE / WEISS / VIT WHITE / WEISS / VIT
For Synchronization / Für Synchronisation / För synkronisering For Synchronization / Für Synchronisation / För synkronisering
BLUE / BLAU / BLÅ BLUE / BLAU / BLÅ
For Flash-mode / Für Blitz-mode / För blinkläge For Flash-mode / Für Blitz-mode / För blinkläge
Bright Flash
Soft Light
Blank Flash
Sync-mode #2 & Flash Pattern #1
Sync-mode #4 & Flash Pattern #3 Standby_Manual_AM452SMA.indd 1 Standby_Manual_AM452SMA.indd 1
SYNC-MODE FLASH PATTERN
Simultaneous
Double (defalut)
(default)
Alternate Triple
Simultaneous STEADY BURN 1
Alternate STEADY BURN 2
website E-mail
www.standby.eu info@standby.eu
EN

Technical Data

Lens
Color
Diodes
Cable
Power
Ambient temp.
Power consumption
Size
Approvals

Included

Synchronizing
Mounting / Montage / Montering Mounting / Montage / Montering

MOUNTING

1 1
2 2
3 3
Connections / Anschluss / Inkoppling Connections / Anschluss / Inkoppling
Connections mounting
BLACK / SCHWARZ / SVART BLACK / SCHWARZ / SVART
RED / ROT / RÖD RED / ROT / RÖD
WHITE / WEISS / VIT WHITE / WEISS / VIT
BLUE / BLAU / BLÅ BLUE / BLAU / BLÅ
BLACK / SCHWARZ / SVART BLACK / SCHWARZ / SVART
NB! The lamp must be mounted on a flat surface. To prevent possible moisture ingress
To Chassis Ground / bis Chassis-massis To Chassis Ground / bis Chassis-massis
into lamp through the cable end, make sure that the end of the cable, are either located
/ Till jordpunk (chassi) / Till jordpunk (chassi)
in a dry part of the vehicle or sealed properly.
RED / ROT / RÖD RED / ROT / RÖD
To +10-30VDC / bis +10-30VDC / Till +10-30VDC To +10-30VDC / bis +10-30VDC / Till +10-30VDC
WHITE / WEISS / VIT WHITE / WEISS / VIT

Connections

For Synchronization / Für Synchronisation / För synkronisering For Synchronization / Für Synchronisation / För synkronisering
Connect the POWER SUPPLY according to the following instructions.
BLUE / BLAU / BLÅ BLUE / BLAU / BLÅ
1
Connect the BLACK cable to a good and suitable ground.
For Flash-mode / Für Blitz-mode / För blinkläge For Flash-mode / Für Blitz-mode / För blinkläge
2
Connect the RED cable to +10-30 VDC via a 5A fuse.
BUILT IN FLASH
The RED wire triggers the
lamp. Connect this wire to a
source output in an I/O-unit or
via a switch.
Nohabgatan 12C, 461 53 SE-Trollhättan Sweden Nohabgatan 12C, 461 53 SE-Trollhättan Sweden
Telephone +46 520 494440, Telefax +46 520 479060 Telephone +46 520 494440, Telefax +46 520 479060
Telephone +46 520 494440, Telefax +46 520 479060 Telephone +46 520 494440, Telefax +46 520 479060
The WHITE wire is to sync
E-mail info@standby.eu • www.standby.eu E-mail info@standby.eu • www.standby.eu
the lamp with other lamps.
Connect this wire with other
sync wires.
The BLUE wire controls the
Standby_Manual_AM452SMA.indd 1 Standby_Manual_AM452SMA.indd 1
day/night function. By con-
Examples
necting this wire to a sinking
output in an I/O-unit or via a
switch to ground, the lamp
will dim down to night level.
Telephone
+46 520 49 44 40
Polycarbonate
Blue, Amber, Red, White
6x High Power LED
2m Basic version
10-30 VDC
-40C - +85C
Peak value: 0,5 A, 13,8 VDC
Average value: 0,35 A, 13,8 VDC
113 x 28 x 9 mm
ECE R65 (E5) Light, ECE R10 (E5) EMC
1x Lamp L52
1x Gasket
1x Assembly kit
10x lamps
Designed in Sweden Designed in Sweden
3 3
VERSIONS / MODELLE / MODELLER VERSIONS / MODELLE / MODELLER
BLACK
To Chassis Ground
BLACK / SCHWARZ / SVART BLACK / SCHWARZ / SVART
45288001, L52 Amber / Gelb / Gu 45288001, L52 Amber / Gelb / Gu
RED
To +10-30VDC
RED / ROT / RÖD RED / ROT / RÖD
WHITE
WHITE / WEISS / VIT WHITE / WEISS / VIT
BLUE
BLUE / BLAU / BLÅ BLUE / BLAU / BLÅ
Power Supply Power Supply
Energieversorgung Energieversorgung
Matningsspänning Matningsspänning
STEADY BURN 1
The WHITE wire triggers the
lamp. Connect this wire to a
sinking output in an I/O-unit
or via an external flasher for a
Nohabgatan 12C, 461 53 SE-Trollhättan Sweden Nohabgatan 12C, 461 53 SE-Trollhättan Sweden
self-defined flash pattern.
E-mail info@standby.eu • www.standby.eu E-mail info@standby.eu • www.standby.eu
Copyright 2016 Standby AB. All rights reserved Copyright 2016 Standby AB. All rights reserved
* Steady Burn is used when an external flasher or
a control system is used to flash the lamp.
Set to STEADY BURN 1 or STEADY BURN 2 by
following further instructions shown below
Configuration.
Designed in Sweden
Copyright 2016 Standby AB. All rights reserved
Mounting / Montage / Mon Mounting / Montage / Mon
1 1
2 2
Designed in Designed in
LEU LEU
Connections / Anschluss / I Connections / Anschluss / I
WARNING!
BLACK / SCHWARZ BLACK / SCHWARZ
This product contains high
intensity LED devices. RED / ROT / RED / ROT /
To prevent eye damage,
WHITE / WEISS WHITE / WEISS
DO NOT LOOK into the light
beam at close range.
BLUE / BLAU BLUE / BLAU
USER MANUAL USER MANUAL
BEDIENUNGSANLEITUNG / ANV BEDIENUNGSANLEITUNG / ANV
BEDIE BEDIE
BLACK / SCHWARZ / SVART BLACK / SCHWARZ / SVART
To Chassis Ground / bis Chassis-massis To Chassis Ground / bis Chassis-massis
L52 Side Marker, ECE R65 Clas L52 Side Marker, ECE R65 Clas
/ Till jordpunk (chassi) / Till jordpunk (chassi) L52 Seitenmarkierung, ECE R65 K L52 Seitenmarkierung, ECE R65 K
L52 Sidomarkering, ECE R65 Kla L52 Sidomarkering, ECE R65 Kla
RED / ROT / RÖD RED / ROT / RÖD
VERSIONS / VERSIONS /
To +10-30VDC / bis +10-30VDC / Till To +10-30VDC / bis +10-30VDC / Till
Power Supply l l
- Horizontal - Horizontal 45288001, L 45288001, L
WHITE / WEISS / VIT WHITE / WEISS / VIT
For Synchronization / Für Synchronisat For Synchronization / Für Synchronisat
see Table Connections
BLUE / BLAU / BLÅ BLUE / BLAU / BLÅ
For Flash-mode / Für Blitz-mode / För For Flash-mode / Für Blitz-mode / För
Technical Data / Technische Daten / Technical Data / Technische Daten /
Power Supply Power Supply
Lens / Linse / Lins Lens / Linse / Lins Polycarbonate/Polykarbona Polycarbonate/Polykarbona
Energieversorgung Energieversorgung Lens / Linse Lens / Linse
Matningsspänning Matningsspänning
Color / Farbe / Färg Color / Farbe / Färg Amber / Gelb / Gul Amber / Gelb / Gul
Color / Farb Color / Farb
Diodes / LEDs / Lysdioder Diodes / LEDs / Lysdioder 6x High Power LED 6x High Power LED
Diodes / LE Diodes / LE
Cable / Leitung / Kabel Cable / Leitung / Kabel 2m Basic version / 2m Grun 2m Basic version / 2m Grun Cable / Leit Cable / Leit
Power / Spannung / Spänning Power / Spannung / Spänning 10-30 VDC 10-30 VDC Power / Spa Power / Spa
Ambient temp. / Betriebstempera- Ambient temp. / Betriebstempera- Ambient te Ambient te
-40 - +85C -40 - +85C
tur / Drifttemperatur tur / Drifttemperatur
tur / Driftte tur / Driftte
Nohabgatan 12C, 461 53 S Nohabgatan 12C, 461 53 S
Peak value / Spitzenlast / T Peak value / Spitzenlast / T
Telephone +46 520 494440, Telephone +46 520 494440,
Power consumption / Stromver- Power consumption / Stromver-
Power cons Power cons
brauch / Strömförbrukning brauch / Strömförbrukning brauch / Str brauch / Str
E-mail info@standby.eu E-mail info@standby.eu
Average value / Mittelwert Average value / Mittelwert
Size / Größe / Mått Size / Größe / Mått 113 x 28 x 9 mm 113 x 28 x 9 mm
Size / Größe Size / Größe
Approvals / Zulassungen / Typgod- Approvals / Zulassungen / Typgod- ECE R65 (E5) Light / Licht / ECE R65 (E5) Light / Licht / Approvals / Approvals /
kännande kännande ECE R10 (E5) EMC ECE R10 (E5) EMC kännande kännande
STEADY BURN 2
1x Lamp 52 / Licht 52 / Lam 1x Lamp 52 / Licht 52 / Lam
Standby_Manual_AM452SMA.indd 1 Standby_Manual_AM452SMA.indd 1
Included / Inbegriffen / Inkluderat Included / Inbegriffen / Inkluderat 1x Gasket / Dichtung / Pack 1x Gasket / Dichtung / Pack Included / In Included / In
1x Assembly kit / Montage 1x Assembly kit / Montage
Follows the power supply.
Synchronizing / Synchronisieren / Synchronizing / Synchronisieren /
Connect the RED wire to a Synchronizi Synchronizi
10x lamps / leuchtes / lamp 10x lamps / leuchtes / lamp
Synkronisering Synkronisering Synkroniser Synkroniser
source output in an I/O-unit
of via an external flasher for a
self-defined flash pattern.
Copyright 2 Copyright 2
AM452D AM452D
L L