Download
Share
Print this page
Standby L54 Manual
  1. Manuals
  2. Brands
  3. Standby Manuals
  4. Lighting Equipment
  5. L54
  6. Manual

Standby L54 Manual

Hide thumbs Also See for L54:

Advertisement

Quick Links

Download this manual
L54
Thank you for choosing a product from Standby.
Technical Data
Lens
Housing
Color
Diodes
Cable
Power
Ambient temperature
Power consumption
Size
Approvals
Included
Synchronizing
Factory Settings
Flash pattern
Double
To change the flash pattern setting, see Flash Pattern. To change the sync mode setting, see Sync Mode.
WAM454A
Polycarbonate
Aluminium (black)
Blue, Amber, Red White
6 high power LED
Single: 0.84 m (160 mm + 680 mm) + 2 m driver cable
Double : 2x 0.84 m (160 mm + 680 mm) + 2 m driver cable
10-30 V DC
-40ºC to +85ºC
0.8 A peak at 13.8 V
0.4 A peak at 27.6 V
Lamp: 85 x 36 x 15 mm
Driver (single): 80 x 14.3 x 18.6 mm
Driver (double): 80 x 14 x 27 mm
Light: ECE R65 (E5)
EMC: ECE R10 (E5)
Single:
1 x L54 Lamp
1 x driver D13s
Double:
2 x L54 Lamp
1 x driver D13d
Up to 10 units (lamps and driver)
Sync mode
Simultaneous
1
Standby AB – standbygroup.se
L54 – Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the L54 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Standby L54

Summary of Contents for Standby L54

  • Page 1 L54 – Manual Thank you for choosing a product from Standby. Technical Data Lens Polycarbonate Housing Aluminium (black) Color Blue, Amber, Red White Diodes 6 high power LED Cable Single: 0.84 m (160 mm + 680 mm) + 2 m driver cable Double : 2x 0.84 m (160 mm + 680 mm) + 2 m driver cable...

  • Page 2: Setting The Flash Pattern

    L54 – Manual Flash Pattern Introduction The flash pattern setting controls the flash pattern. There are four versions of flash pattern: Double, Triple, Steady burn 1 and Steady burn 2.  Double and Triple are built-in flash patterns and no control system is needed.
  • Page 3 L54 – Manual 5. Within 1 to 6 sec: temporarily connect the white wire to ground and let it stay connected for at least 2 sec. The lamp enters configuration mode and a flash sequence indicating the current settings starts.

  • Page 4: Setting The Sync Mode

    L54 – Manual Sync Mode Introduction The sync mode setting controls how the flashing of two or more lamps is synchronized. There are two versions of sync mode: Simultaneous and Alternate.  Simultaneous means that the lamps are in sync, that is they come on and go off at the same time.
  • Page 5 L54 – Manual 5. Within 1 to 6 sec: temporarily connect the white wire to ground and let it stay connected for at least 2 sec. The lamp enters configuration mode and a flash sequence indicating the current settings starts.

  • Page 6: Reset To Factory Settings

    L54 – Manual Factory Reset Introduction The settings can be changed back to the factory settings. The factory settings are the following:  Flash pattern – Double  Sync mode - Simultaneous Reset to Factory Settings WARNING Risk of eye damage. Do not look into the beam at close range.
  • Page 7 L54 – Manual 5. Within 1 to 6 sec: temporarily connect the white wire to ground and let it stay connected for at least 2 sec. The lamp enters configuration mode and a flash sequence indicating the current settings starts.
  • Page 8 L54 – Manual Connections The function of each wire and how to connect the wires depend on the chosen flash pattern setting. Table 1. Connections when flash pattern Double/Double, Double/Triple, Double/Steady burn or Triple/Steady burn is selected. Wire Functions Connect to...
  • Page 9 L54 – Manual Table 2. Connections if flash pattern Steady burn 1 is selected. Wire Functions Connect to Black Power supply Good and suitable ground Power supply 10-30 V DC via a 5 A fuse White Lamp on/off Sinking output (-) of an I/O unit or external flasher.

  • Page 10: Installation

    L54 – Manual Installation CAUTION The lamp must be mounted on a flat surface. To prevent moisture from entering the lamp through the cable end, make sure that the cable end is sealed or located in a dry part of the vehicle.
  • Page 11 L54 – Manual Reversing lamp Side View Top View Measure from horizontal plane Single White L54 used as an ECE R148 approved reversing lamp must be mounted according to the instruction above. WAM454A Standby AB – standbygroup.se...