General Information And Safety; Intended & Non-Intended Uses; User Instructions - Opera Classic Installation And User Manual

Before you begin! We recommend that you conduct a risk assessment to
ensure that the Opera Classic Wall Protector meets your requirements and
does not become a trip hazard.

1. General Information and Safety

Intended & Non-Intended Uses
The Opera Classic Wall Protector is designed to reduce the risk of an Opera
Classic Profiling Bed being placed too close to a wall, a plug socket, skirting
board or fixture, which may be damaged by the bed. The wall protector gives a
90mm clearance from the bed surrounds to the wall or fixture.
The Opera Classic Wall Protector is only designed to be used with the Opera
Classic Profiling beds. Opera will not be liable for any hazards, injury, or
damage arising from using the wall protector incorrectly or with a different
bed.

2. User Instructions

Always read the instruction manual before using the wall protectors, pay
i
particular attention to the instructions below.
Always carry out a risk assessment to ensure that the wall protector is
suitable for the required application. Ensure that the installation of wall
protectors does not create risks for both staff and users, in particular, trip
hazards.
The wall protectors should only be fitted to the bed at points where the bed is
against a wall, socket, fixture or skirting board, non compliance with this may
result in creating trip hazards, this can result in serious injury.
If the bed is moved away from the wall without the wall protectors being
removed, this can result in creating trip hazards, and may result in serious
injury. Always remove the wall protectors before moving and relocating the
bed.
Check the fixings monthly to ensure that there are no loose parts.
2 | Opera Care Classic Wall Protector Installation Guide Version 2