Download Print this page

Opera Classic Installation And User Manual

Wall protector

Hide thumbs Also See for Classic:

Opera Classic Wall

Protector Installation

and User Guide

opera-care.co.uk | 0333 222 8584 |

Table of Contents

Need help?

Do you have a question about the Classic and is the answer not in the manual?

Page 1 Opera Classic Wall Protector Installation and User Guide opera-care.co.uk | 0333 222 8584 |...
Page 2 1. General Information and Safety Intended & Non-Intended Uses The Opera Classic Wall Protector is designed to reduce the risk of an Opera Classic Profiling Bed being placed too close to a wall, a plug socket, skirting board or fixture, which may be damaged by the bed. The wall protector gives a 90mm clearance from the bed surrounds to the wall or fixture.
Page 3 2. User Instructions Always use the appropriate clamp size, do not use the wall protector if the clamp size is too large, when in doubt consult Opera at support@opera-care co.uk. It is recommended that wall protectors are attached to the columns of the beds that face a wall, socket or skirting board, to attach the wall protectors please follow the instructions below.
Page 4 Opera Care Azure House, Connaught Road, Kingswood, Hull. HU7 3AP 0333 222 8584 support@opera-care.co.uk opera-care.co.uk Published November 2020...