Zenox Jupiter Series Assembly Manual

Armrest Covers
D
INSTALL
Tilt Handles
E
Plug the handles into the tilt mechanism.
將把手裝到托盤上.
Contact us via email at aftersales@zenoxstore.com,
or WhatsApp™ at +852 8481 7841.
如有需要請以電郵或WhatsApp™跟我們聯絡.
SUPPORT
The product is considerably heavy, grab a friend and do
the installtion together if possible.
產品有一定重量，如果可以找個朋友幫忙安裝.
HEAVY
Stop using the product with damaged parts.
如發現產品有損壞，請立刻停止使用.
CAUTION
Sit in the center of the chair,
back against the backrest.
請坐於椅子中間，背靠椅背.
Do Not Sit at the edge of the chair,
as it will tilt the balance.
請勿坐於椅子邊，造成傾倒危險.
Do Not Stand on the chair, and use
it as any form of stool or ladder.
請勿站在椅子上，或當成梯子或脚踏使用.
MAGNET INSIDE
REMOVE
I
Be Careful when using the recliner and
other moving parts of chair.
請小心使用調角器和其他移動部件.
Avoid Direct Sunlight as it would cause
fading and damage the upholstery.
避免陽光直接照射產品，導致面料損壞.
Avoid Strong Chemicals or scrubbing
excessively, as it would cause fading and
damage the upholstery.
避免使用强烈清潔劑或大力摩擦，導致面料損壞.
Jupiter & Spectre Series
MK-II Gaming Chair Assembly Guide
Assembly Videos
www.zenoxstore.com/pages/assembly-guides