Download Print this page
Zenox Zeus PRO Series Installation Manual

Zenox Zeus PRO Series Installation Manual

Gaming desk

Advertisement

Quick Links

1. The product has to be used within the constraints of its
specifications.
2. We recommend installtion of desk by 2 adults, as some parts
are considerably heavy;
3. The desk is designed for regular desktop work only. Do not
use it as a stepstool or any other purposes;
4. Keep the product away from corrosive chemicals and dusty
environments;
5. Clean with gentle cleaners if necessary, and do not scrub
excessively;
6. All parts should be checked regularly to ensure the desk is
safe to use;
7. Stop using the product immediately if the table is found
damaged. Please check the maintenanace guide on our
website or contact us over the phone or via e-mail at
sales@zenoxstore.com.
Got your back on every mission
Zeus
PRO
G a m i n g
宙斯電競桌安裝指南
I n s t a l l a t i o n M a n u a l
www.zenoxstore.com/pages/assembly-guides
Series
D e s k

Advertisement

loading

Summary of Contents for Zenox Zeus PRO Series

  • Page 1 1. The product has to be used within the constraints of its specifications. 2. We recommend installtion of desk by 2 adults, as some parts are considerably heavy; Got your back on every mission 3. The desk is designed for regular desktop work only. Do not use it as a stepstool or any other purposes;...
  • Page 2 BOX 01 高度記憶設定 1. 使用 “▼”“” 按鈕調節至理想高度,例如70CM 高. 2. 按 “M” 儲存鍵直至 LED 控制面板顯示 “S-”, 然後再按 “1” 儲存現在 高度為第一個高度記憶. LED 控制面板 “S-1”代表設定完成. Table Top x 1 Lifting Columns x 2 3. 重複以上動作至 “2” 跟 “3” 設定第二跟三高度記憶. 桌面 升降柱 BOX 02 4.
  • Page 3 錯誤診斷碼一覽 Diagnos�c Trouble Codes Overuse Protection Mode Allow system rest for 13 minutes 過度使用保護模式 暫停使用系統 13 分鐘,避免發生 to prevent overheating. 過熱情況. 過度使用保護模式 系統過熱, 暫停使用系統 25 分 Overuse Protection Mode System is overheating. Allow system rest for 25 minutes 鐘讓系統冷卻. before resuming useage. E03/ Overload Protection Mode Reduce load applied should it...
  • Page 4 Height Memory Se�ng 步驟 1. Set the desk to a preferred height by using the “▼”“” buttons, 70cm for instance. 2. Press the “M” SAVE button and the LED display shows “S-“, then press “1” to save the 1st height position to 70cm. The LED display shows “S-1”.