Advertisement
Quick Links
Got your back on every mission
Office Desk
S e r i e s
辦公桌安裝指南
I n s t a l l a t i o n M a n u a l
www.zenoxstore.com/pages/assembly-guides
1. The product has to be used within the constraints of its
specifications.
2. We recommend installtion of desk by 2 adults, as some parts
are considerably heavy;
3. The desk is designed for regular desktop work only. Do not
use it as a stepstool or any other purposes;
4. Keep the product away from corrosive chemicals and dusty
environments;
5. Clean with gentle cleaners if necessary, and do not scrub
excessively;
6. All parts should be checked regularly to ensure the desk is
safe to use;
7. Stop using the product immediately if the table is found
damaged. Please check the maintenanace guide on our
website or contact us over the phone or via e-mail at
sales@zenoxstore.com.
Advertisement
Related Manuals for Zenox Office Desk Series
Summary of Contents for Zenox Office Desk Series
- Page 1 1. The product has to be used within the constraints of its specifications. 2. We recommend installtion of desk by 2 adults, as some parts are considerably heavy; Got your back on every mission 3. The desk is designed for regular desktop work only. Do not use it as a stepstool or any other purposes;...
- Page 2 BOX 01 步驟 Table Top x 1 桌面 BOX 02 M8*20mm x 4 Support Plates Fixed Columns x 2 Lifting Columns x 2 M6*25mm x 8 固定柱 固定板 *Slide the Lifting Columns 步驟 into the slot and affix to the frame with the 4 M8 bolts.
- Page 3 BOX 01 步驟 Table Top x 1 桌面 BOX 02 *Slide the Lifting Columns into the slot and affix to M8*20mm x 4 the frame with the 4 M8 bolts. *把升降柱滑入固定孔卡槽， 並用4顆M8螺絲鎖在框架上. Support Plates Lifting Columns x 2 升降柱 M6*25mm x 8 固定板...
- Page 4 Posture Change Alarm System 坐姿提示功能設定 1. Press the “A” button on the control panel to switch to 1. 按下“A”按鈕進入提示設定模式，“ ” 為成功進入. alarm setting mode, and “ ” will be shown. 2. 兩秒後顯示屏會開始閃爍，按下 “▼”“” 按鈕調節時間分段. 2. After 2 seconds, the display will start to flash, press the “▼”“”...
- Page 5 步驟 *The desk is considerably heavy, and we suggest moving by at least 2 adults. *桌子有一定重量，建議由最少2位成人移動. 重物 高度記憶設定 Height Memory Se�ng 1. Set the desk to a preferred height by using the “▼”“” 1. 使用 “▼”“” 按鈕調節至理想高度，例如70CM 高. buttons, 70cm for instance. 2.
- Page 6 錯誤診斷碼一覽 Diagnos�c Trouble Codes Overuse Protection Mode Allow system rest for 13 minutes 過度使用保護模式 暫停使用系統 13 分鐘，避免發生 to prevent overheating. 過熱情況. 過度使用保護模式 系統過熱， 暫停使用系統 25 分 Overuse Protection Mode System is overheating. Allow system rest for 25 minutes 鐘讓系統冷卻. before resuming useage. E03/ Overload Protection Mode Reduce load applied should it...