Huawei EG8245W5-6T Quick Start Manual page 7

EG8245W5-6T
Quick Start
No.
1
2
3
4
5
6
7
8
Issue 02 (2021-09-09)
Item Description
On/Off Powers the ONT on or off.
Power Connects to a power adapter.
TEL1- Connects to the ports on a telephone or fax machine.
TEL2
LAN1- Connects to PCs or IP set-top boxes (STBs).
LAN4
USB Connects to USB storage devices.
Reset Press the button for a short time to reset the device, or press
the button for a long time (longer than 10s) to restore the
device to the default settings and reset the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a reset,
contact your Internet service provider.
Optical The optical port is equipped with a rubber plug and
port connected to a fiber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
WPS/ ● When the wireless function (WLAN) is enabled, press the
WLAN WLAN/WPS switch for 1s to 5s to start Wi-Fi protected
setup (WPS) negotiation.
● When the wireless function (WLAN) is enabled, press and
hold the button WLAN/WPS switch for more than 5s to
turn off the wireless function (WLAN).
● When the wireless function (WLAN) is disabled, tap the
WLAN/WPS switch for more than 1s to turn on the wireless
function (WLAN).
NOTE
If the WLAN indicator is steady on or blinks, the wireless function
is enabled. If the WLAN indicator is off, the wireless function is
disabled.
Copyright © Huawei Technologies Co., Ltd.
2 Connecting Cables
4