Performing A Blood Glucose Test - Prodigy AutoCode Owner's Manual

PRODIGY

Performing a Blood Glucose Test

STEP 1: Insert the Test Strip
Insert a test strip with the contact bar end entering
into the test strip slot first. Push the test strip as far
as it will go without bending it. The meter turns on
automatically. See Figure 30.
Voice Speaks: "Your Prodigy
Please wait. Please apply blood into the
test strip."
STEP 2: Apply Blood Sample
When the meter shows the " ", apply blood to the
opening of the absorbent channel of the test strip
where it meets the narrow channel. Blood will be
drawn into the test strip. See Figure 31.
If the test strip confirmation window is full
( See Figure 32) , you will hear a beep.
Voice Speaks: "Now testing."
If the confirmation window is not full, "L-b" is displayed
and a new test strip will need to be used.
If you have trouble filling the test strip, please contact
Customer Care at 1.800.243.2636 for assistance.
Prodigy Diabetes Care, LLC
®
meter is on.
31
Owner's Manual
Figure 30
Figure 31
Figure 32
1.800.243.2636