Advertisement
○ Test OPEN or CLOSE options to ensure the door controller installation is done
correctly
○ Test STOP to ensure the door controller installation is done correctly
** to ensure open and close will work as expected, please select STOP before opening or
closing the door.
7. Recommended Tools/Supplies
○ Phillips Head/Flathead screwdriver
○ 22 AWG gauge wire
■ Prefer green, yellow, red, and black
○ Wire Stripper
○ Terminal wire connector
○ Crimp lugs
○ Crimp tool
○ Drill if necessary
8. Specifications:
Operating
Temperature
Dimensions
5 x 7.5 x 1.75 in.
W x L x H
Weight
300g
Input Voltage
12V @ 1.5A
DCN-8000-17-v1
February 2018
www.hangarbot.com
8
Advertisement
