Disposal; Troubleshooting; Technical Specifications - Silvercrest SDBE 2400 A1 Operating Instructions Manual

Hide thumbs Also See for SDBE 2400 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
__CPE100696_B4.book Seite 11 Freitag, 11. Juli 2014 10:39 10

10. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair the
device yourself under any
circumstances.
Fault
Possible causes / Action
• Connect the device to the
mains power supply.
No
• Use the temperature control-
function
ler 16 to turn up the temper-
ature.
Fault
Possible causes / Action
• Fill the water tank 15 to at
least one quarter full.
Little or
• Switch on the steam flow
no steam
rate controller 3(
• Run the self-cleaning cycle.
• Fill the water tank 15 to at
Steam
least one quarter full.
burst is
• Set the right temperature.
not work-
• Leave a pause of a few sec-
ing.
onds between steam bursts.
Spray
• Fill the water tank 15 to at
burst is
least one quarter full.
not work-
• For the first spray burst, you
ing.
need to pump several times.
Acoustic
Automatic shut-off, if:
alarm
-
the device has stood still in
(bleep) /
vertical position for approx.
operat-
8 minutes.
ing
-
the device has stood still on
lamp 6
the sole plate for approx.
flashes.
30 seconds.
-
the device has laid on its
side for approx. 30 sec-
onds.
Pick up the steam iron by its han-
dle 7 and hold it horizontally for
a few seconds or make some
ironing movements.
12. Technical
specifications
Model:
SDBE 2400 A1
Mains voltage:
220 - 240 V ~ 50/60 Hz
Protection class: I
Power rating:
2,000 - 2,400 W
Subject to technical modification.
).
11
GB

Advertisement

Table of Contents
loading

Table of Contents