Advertisement
Technical Specifications
Powered by 4 size AA, 1.5 volt batteries. Power consumption approx. 3.3mA.
Battery life approximately 2-4 months using Alkaline batteries.
Alarm volume typically 85dB SPL at distance of one meter
The diameter size of the sensor pad is 216mm
Babysense Connect has a service life of 3 years from date of purchase
Conditions of Operation & Storage
Conditions of operation are as follows:
Temperature: 0 °C to 40 °C
Relative humidity: 20 %RH to 80 %RH Atmospheric pressure: up to 55kPa
Conditions of storage between uses are as follows:
Temperature: 0 °C to 40 °C
Relative humidity: 5 %RH to 95 %RH Atmospheric pressure: up to 55kPa
Contents
Control Unit
Control Unit Holder
Optional Hanging Hook
2 Sensor pads
2 Cable Ties (tied around the sensor cables when supplied)
User Manual
Please note that the batteries are not supplied.
Cleaning and Disposal
As necessary, the device (sensor pads and control unit) may be wiped with a damp cloth.
The device and accessories are to be disposed of according to local regulations after their service lives.
Alternatively, they can be returned to the dealer or the manufacturer for recycling or proper disposal.
Caring for your Babysense Connect
Babysense Connect requires no special treatment beyond replacing batteries when the battery indication
LED flashes Orange. The sensor pads and control unit may be wiped with a damp cloth.
Batteries should be removed, and device stored in a dry shaded place when not in use.
It is recommended to replace sensor pads two years after
their first use. Use only Babysense Connect sensor pads.
Made by Hisense Ltd
27 Shaked Street Hevel Modi'in
Industrial Park, 731990 ISRAEL
Tel +(972) 3 956 66 04
www.hisense.co.il
10
0459
Advertisement
