Download Print this page

Safe Fleet MVQ-V75V100-MTPLT Installation Manual

Mounting bracket

Advertisement

Quick Links

 CAUTION! Retaining screws
To ensure safety, both retaining screws must be installed.
 TIP: Accessing retaining screws
We recommend using a magentic-tipped long screwdriver or a multi-driver tool with a bit extension
to access the retaining screws.
Service & Support
If your MVQ-V75V100-MTPLT mounting bracket is to be returned for service,
please contact the Safe Fleet technical support team, provide the part and/or
serial # of your unit, and ask for a Return Merchandise Authorization (RMA)
number.
An RMA # allows the support team to better track your product when it comes
in for service. Please show the RMA # on the outside of the package.
ANY PRODUCT SENT WITHOUT AN RMA # MAY BE REFUSED!
Technical Support
Phone: 1.844.899.7366
Email:
PTsupport@safefleet.net
2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return the product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points, for more information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
This guide provides instructions on how to use the MVQ-V75V100-MTPLT universal mounting bracket when
installing your public display monitor.
About the mounting bracket
The MVQ-V75V100-MTPLT bracket is intended for mounting monitors that comply with the following standard
VESA mounting hole patterns:
75mm x 75mm
100mm x 100mm
What is included
The MVQ-V75V100-MTPLT mounting bracket assembly contains the following components:
Wall mount bracket
assembly 1pc
Includes:
1 VESA plate
1 wall plate
2 retaining screws
Documentation
and Warranty
 NOTE: Wall mounting screws
Additional copies of this
guide along with other
Due to the variations in installation scenarios, the screws required to secure the wall plate to the mounting
documentation and product
surface are to be provided by the customer.
warranty can be found on
the Safe Fleet Community
website:
https://community.
safefleet.net
MVQ-V75V100-MTPLT Mounting Bracket
© Safe Fleet | February 2023 | All rights reserved | Part #: 700-1178 R3
Installation Guide
M4x8mm VESA mounting
screw - 4 pcs
For use with the 10.4" Public
Display Monitor
M4x6mm VESA mounting
screw - 4 pcs
For use with the 15.6" Public
Display Monitor
Washer - 4 pcs
For use with both the 10.4" and
15.6" Public Display Monitors

Advertisement

loading

Summary of Contents for Safe Fleet MVQ-V75V100-MTPLT

  • Page 1  CAUTION! Retaining screws Installation Guide To ensure safety, both retaining screws must be installed. This guide provides instructions on how to use the MVQ-V75V100-MTPLT universal mounting bracket when installing your public display monitor. About the mounting bracket The MVQ-V75V100-MTPLT bracket is intended for mounting monitors that comply with the following standard VESA mounting hole patterns: •...
  • Page 2 Mount wall plate How to install Hold the wall plate against the mounting surface so the wall plate holes are aligned with the drilled holes. Insert the wall mounting screws into the holes and finger tighten them. Fully tighten the screws Typically, you should proceed with bracket installation after you have connected all the cables to the monitor.