Safe Fleet C3Q9PD Quick Install Manual

Mounting the bracket template
Use the following mounting bracket template to mark the positions of the mounting and cable entry
holes on the mounting surface.
1.8"
.81"
3.62"
2"
Support
• Phone: 1.844.899.7366
• Email: PTsupport@safefleet.net
2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return the product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points, for more information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
3.6"
2x Mounting Holes 2x 0 .27" Slots
Documentation
Additional copies of this guide, along with other supporting
documentation can be found on the Safe Fleet Community:
• https://community.safefleet.net
Information is subject to change without notice. Please
check Safe Fleet Community for the latest version.
C3Q9PD Forward-facing Bracket
Quick Install Guide
For camera models:
C3Q9PD03AF-BK-FF, C3Q9PD04AF-BK-FF
Introduction
Read these instructions before installing this
product. A qualified service person, complying
with all applicable codes, should perform the
installation.
1.81"
To use this document, you must have the
following minimum qualifications:
• Basic knowledge of electronic surveillance
systems and components
• Familiarity with electrical wiring and low
voltage electrical hookups
Kit Components
Check components for visible damage. If any
components are damaged or missing, contact
the Safe Fleet Service team and request an RMA
(Return Material Authorization).
• Mounting bracket (MVC-9100-FF-BRKT)
• Bracket set-screw kit (020-1080)
• Qty 2 1/4" - 20 x 1/2" hex head screws
(600-1033)
• Qty 2 1/4" washers (610-1005)
• Qty 2 - #8-32, 0.5" camera mounting
screws (600-0077)
• Qty 2 - #8 split ring washers (610-1004)
Warranty
For full warranty information, visit:
www.seon.com/documents/Seon-Warranty.pdf
Service
If your C3Q9PD bracket is to be returned for service, please call toll free 1.877.630.7366, or
1.844.899.7366, and provide the model and/or serial# of your unit.
Ask for a Return Merchandise Authorization (RMA) number. An RMA# allows the Service
Technicians to better track your product when it comes in for service. Please show the RMA# on
the outside of the package. ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED.
Installation
You can mount the bracket/camera from
above or below (inverted). Some mounting
surfaces may require reinforcement to
minimize camera vibration. In such cases,
place a tapping plate behind the mounting
surface.
Bracket Assembly and Camera
© Safe Fleet | 2021 | All rights reserved | Part #: 700-1169 R3