Table of Contents
Advertisement
TSL Extender - Scoop EXL
Application
The two "Extenders" must be applied to the Scoop EXL
stretcher, (empty for easy installation) and checked to
ensure they are installed correctly.
1. Separate both sides of the Scoop EXL stretcher.
Apply the "Extender" to the Scoop EXL stretcher's
TSL system (fig. 1).
2. Lock the Scoop EXL stretcher by bringing the
opposing components together.
3. Check the connection is tight (fig. 2).
Repeat the preceeding for the opposite side of the Scoop
EXL stretcher
Loading the patient:
The patient loading sequence must be as described in the Scoop EXL stretcher manual; only use additional staff for the carrying
of the stretcher.
© Ferno Washington Italia. Rel.161115 ENG
Figure 2
Figure 1
5
Advertisement
Table of Contents
