Advertisement
Secure the Mounting Arm to the
7
Mount Bracket, with 5x M6x10mm
screws.
Follow the shown
Follow the shown
guide if installing your
guide if installing your
device in Landscape.
device in Landscape.
Wing - Tablet Setup
Assembly Instructions
TDL16
Device:
iPad Pro 12.9" (Gen3,4,5)
TDL17
Tools Required:
All tools provided
Sheet Code:
BP-IM-074_REV0
Release Date:
15/06/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
TDL16
copyright holder.
Follow the tablet specific assembly guide
shown for locating your tablet setup kit.
!
Take care to ensure correct thread
engagement between the fixings & tablet
supports.
Follow the shown
Follow the shown
guide if installing your
guide if installing your
*Your configured product may not be representative of the shown illustration.
**The Bouncepad lock is an optional extra (at additional charge).
device in Portrait.
device in Portrait.
TDL16
TDL16
Tablet support
M4x8mm
Buttonhead
screw
TDL17
Complete the separate tablet setup
10
document - specific to your tablet,
device orientation & locking method.
*If requiring an upgrade to a
keyed Case, please contact us.
Secure the Faceplate shut with your
13
chosen locking method.
Remove the Faceplate from the Case
8
Back. Store this aside.
*The Case is configured to your order.
If requiring a different tablet
configuration, please contact us.
TDL16
TDL17
TDL16
TDL17
TDL16
TDL16
Install the tablet and the tablet
11
power cable.
Locate and secure the
14
Access Panel to the
Mounting Arm.
Locate and secure the Case Back to
9
the Mounting Arm, with 4x M6x10mm
screws. Ensure good Case alignment.
12
Connect the tablet to a power source.
*Kensington security
cable not provided.
For added security, install
15
a Kensington security
cable.
Installation is
16
complete.
Advertisement
