QUAD Artera Pre User Manual page 15

Default Channel
Artera Pre can default to your choice of input when switched on. Alternatively it can be set to "Recall Last Input". The unit is set to
"Recall Last Input" by default.
Default Channel
Recall Last Input
Auto Standby
Artera Pre features three modes of Standby, all of which can be set through the menu settings.
Auto Standby Never: even if there is no signal input, the unit will not enter Standby automatically.
Auto Standby 20 Minutes：if there is no signal input for 20 minutes, the device will enter Standby automatically.
Auto Standby 1 Hour：if there is no signal input for 1 hour, the device will enter Standby automatically.
Auto Standby
Never
Brightness
The brightness of the display can be adjusted and has 8 levels. This feature can also be accessed directly using the display key on
the remote control - press and hold to access brightness levels, further presses will change the level.
Brightness
Level1
Factory Reset
To restore the Artera Pre to its factory default settings, select Reset then Yes to confirm.
Factory Reset
Reset
Firmware
The last menu option show the current firmware version of the Artera Pre.
Firmware
Ver:0.31
Auto Standby
20 Minutes
Brightness
Level8
Factory Reset
Yes / NO
14
Auto Standby
1 Hour