Installing The Red Hat Enterprise Linux 6.7 Operating System - Lenovo ThinkServer RS140 Installation Manual

a. Click Create. The Create Storage window is displayed.
b. Select Standard Partition and then click Create.
c. In the Add Partition window, select swap from the File System Type drop-down list box.
d. In the Allowable Drives window, select the hard disk drive on which you want to install the
operating system.
e. Type the amount of space (in MB) of the new partition and then click OK.
14. If the Format Warnings window is displayed, click Format to format the hard disk drive.
15. In the "Writing storage configuration to disk" window, click Write changes to disk.
16. In the "Boot loader operating system list" window, click Next.
17. The default installation is a basic server installation. You can customize your server by selecting a
different set of software from the software list or adding additional repositories that you want to use for
the software installation. Select Customize now or Customize later. Then, click Next. The installation
process begins.
Notes:
• If you select Customize now, you can select software installation packages of your choice. Then,
click Next.
• When installing the operating system in UEFI mode, do not select the package named tboot-1.7.4-1.
el6.x86_64 - Perfomrms a verified launch using Intel TXT.
• If a warning message is displayed, configure the settings as you need. The following steps are based
on the scenario that Continue is selected in this step.
18. After the installation is completed, click Reboot to restart your server.
19. The installation continues after the server restarts. In the Welcome window, click Forward.
20. Click Yes, I agree to the License Agreement and then click Forward.
21. In the Set Up Software Updates window, configure the settings as you need, and then click Forward.
22. In the Finish Updates Setup window, click Forward.
23. Set your user name and password and then click Forward.
24. Set your time and date and then click Forward.
25. In the Kdump window, configure the settings as you need. The following steps are based on the
scenario that Enable kdump is selected in this step. Then click Finish to complete the installation.
Note: When prompted to restart the server, click Yes ➙ OK.
26. Follow the instructions on the screen to log in to the operating system.

Installing the Red Hat Enterprise Linux 6.7 operating system

This topic provides instructions on how to install the following operating systems:
• RedHat Enterprise Linux 6.7 (x86)
• RedHat Enterprise Linux 6.7 (x64)
To install the Red Hat Enterprise Linux 6.7 operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. In the "RedHat Enterprise Linux 6.7 Welcome" window, select Install or upgrade an existing system in
multiple options and press Enter.
22
ThinkServer RS140 Operating System Installation Guide