Installing The Suse Linux Enterprise Server 11 Operating System With Service Pack 4 - Lenovo ThinkServer RS140 Installation Manual

e. In the Mount partition area, select /boot (or /boot/efi in UEFI mode) from the Mount Point drop-
down list box.
f. Click Finish.
• Manually create a swap partition
To create a swap partition, do the following:
a. In the Expert Partitioner window, select Hard Disks in the System View area. Select the hard disk
drive on which you want to install the operating system and then click Add.
b. Select Primary Partition, and then click Next.
c. Select Custom Size and type the amount of space (in MB or GB) in the Size field. Then, click
Next.
d. In the Formatting Options area, select Swap from the File system drop-down list box.
e. In the Mount partition area, select Swap from the Mount Point drop-down list box.
f. Click Finish.
9. In the Expert Partitioner window, ensure that the drive partition is correct, and click Accept.
Note: If prompted, click Yes.
10. In the Installation Settings window, click Software to select your desired software programs, and then
click OK ➙ Accept.
11. Click Install to install the software programs that you have selected.
Note: If prompted, configure the settings as you need and click Install.
12. The setup process continues after the server restarts. Set your root user password. Then, click Next ➙
Yes.
Note: The password must contain at least six characters, and consist of uppercase letters, lowercase
letters, and digits.
13. Set your host name and domain name. Then, click Next.
14. Configure your network in the Network Configuration window. Then, click Next.
15. In the Test Internet Connection window, configure the setting as you need. Then, click Next.
16. In the "Network Services Configuration" window, click Next.
Note: If the CA Management error occurs, select Do Not Create CA and Certificate, and click Next ➙
Yes.
17. In the "User Authentication Method" window, configure the settings as you need. Then, click Next.
18. In the New LDAP User window, configure the settings as you need and click Next ➙ Yes.
19. In the Release Notes window, click Next.
20. In the Hardware Configuration window, click Next.
21. In the Installation Completed window, click Finish.
Note: If prompted, click Continue.
22. Follow the instructions on the screen to log in to the operating system.
Installing the SUSE Linux Enterprise Server 11 operating system with
Service Pack 4
This topic provides instructions on how to install the following operating system:
• SUSE Linux Enterprise Server 11 SP4 (x86)
• SUSE Linux Enterprise Server 11 SP4 (x64)
36
ThinkServer RS140 Operating System Installation Guide