PIXEL MAPPING
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait a few minutes
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1
In the shooting mode top menu, select
MODE MENU T SETUP T PIXEL
MAPPING, and press
• START is displayed.
~
"How to use the mode menu" (P. 30)
2
Press
.
• The BUSY bar is displayed during Pixel Mapping.
When Pixel Mapping is finished, the screen
returns to the mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start
again from step 1.
Note
í
.
ÑñÉí
Arrow pad (
91
)
6