Suzuki V-STROM 1050 2022 Manual page 179

Spring Pre-load Adjustment
To adjust the rear suspension spring
pre-load, turn the adjuster 1.
As you turn the adjuster, you will notice
the clicks. Count the number of clicks
from the softest position. Turning the
adjuster clockwise will stiffen the spring
pre-load and turning it counterclockwise
will soften the spring pre-load.
The spring pre-load is set at the factory
on 11 clicks from the softest position.
Damping Force Adjustment
The rebound damping force adjuster 2
is located at the bottom of the rear sus-
pension damper unit. To adjust the
damping force, set the adjuster to the
standard setting first and then adjust it
to the desired position.
2-128