Connection And Setup; Inspection Checks; Rj45 Connections; Power Up - Parallax PDT-PIN-7002-MP-I Operation Manual

8. Connection and Setup

8.1 Inspection Checks

Please inspect the unit to ensure that there is no damage to the external casing which could cause a
malfunction of the device or cause a safety critical fault. Any damaged units should be returned to Parallax
Digital Technologies for inspection and testing.
Please ensure that the DC Cables are securely fastened in the terminal block, and that the terminal block is
wired correctly, and correctly inserted into the switch power connector housing.

8.2 RJ45 Connections

Ensure all required RJ45 Ports are connected correctly using CAT5e cable or better to the client devices.
The source data feed should be connected to the DATA IN Ports, and the target end device should be
connected to the PoE+ OUT Port(s).

8.3 Power Up

The Unit will automatically power up as soon as DC power is applied to the device. The Power Light will be
illuminated, and as soon as valid power is available to the target device, the PoE LED(s) will illuminate.

9. Physical Dimensions

All Dimensions are in mm