Connectors And Indicators; Led Indicators; Rj45 Ports; Power Supply Connector - Parallax PDT-PIN-7002-MP-I Operation Manual

6. Connectors and Indicators

6.1 LED Indicators

The Front Panel LEDs display the status of the switch and the associated port connections as
indicated in the table below:
LED
PWR
PoE 1/2 PoE Output Power

6.2 RJ45 Ports

The Front Panel has 2 RJ45 Ports; the DATA IN Ports is used as the Data Input Port and are not PoE
compatible. The PoE OUT Ports should be used to connect directly to PoE devices.

6.3 Power Supply Connector

Model No
PDT-PIN-7002-MP-I
Note: All Power Supplies should provide over-current and short-circuit protection and should have
a capacity rating to meet the required output current for the device.
Front Panel
Name
Power
V-
GND
Colour State
OFF
Green
ON
OFF
Green
ON
V+
+12-48VDC
Status
Unit Power Off
Unit Power On
PoE Output On
PoE Output Off
Power Input