Midi Continuous Controller Assignments; User Presets Dump/Load - Mesa/Boogie MARK VII Owner's Manual

MIDI CONTINUOUS CONTROLLER ASSIGNMENTS

MARK 7 MIDI CC
FUNCTION NUMBER
Ch.1 & IR
Ch.2 & IR
Ch.3 & IR
Channel 1
Channel 2
Channel 3
FX Loop
Reverb
Graphic EQ
NOTE:
MIDI CC Numbers #20 - #25 are mutually exclusive; the most recently received takes priority.

USER PRESETS DUMP/LOAD

DUMP (SEND) USER PRESETS
A User Presets Dump will send a MIDI SysEx file with the amplifier's presets and any other settings out through
the MIDI THRU/OUT jack. The User Presets Dump includes CRC (Cyclic Redundancy Check) bytes for MIDI
error detection.
To perform a User Presets Dump from one amplifier to another, making an exact clone, connect the MIDI
THRU/OUT jack of the original to the MIDI INPUT jack of the clone. Remember to set the MIDI Channel of the
clone so it matches that of the original (unless you don't actually want them to respond to MIDI messages on
the same MIDI Channel).
The User Presets Dump can also be saved to a computer as a backup or to load the presets into another am-
plifier at some other time. In addition to the computer, you will also need a MIDI/USB Interface and a MIDI app/
utility capable of sending and receiving MIDI SysEx messages or files. Two free apps that we recommend are
SysEx Librarian by www.snoize.com (Mac OS X) and MIDI-OX by www.MIDIox.com (Microsoft Windows).
A USER PRESETS DUMP CAN BE PERFORMED AFTER:
• The amplifier is first powered up and prior to receiving any MIDI messages.
• The amplifier has received a User Presets Load, whether successful or not.
MIDI CC
VALUES
20 0 - 7
21 0 - 7
22 0 - 7
23 64 - 127
24 64 - 127
25 64 - 127
0 - 63 (OFF)
26
64 - 127 (ON)
0 - 63 (OFF)
27
64 - 127 (ON)
0 - 63 (OFF)
28
64 - 127 (ON)
Selects Channel 1 and CabClone IR Preset 1 - 8
Selects Channel 2 and CabClone IR Preset 1 - 8
Selects Channel 3 and CabClone IR Preset 1 - 8
Selects Channel 1 and CabClone IR per Ch1 IR Sw.
Selects Channel 2 and CabClone IR per Ch2 IR Sw.
Selects Channel 3 and CabClone IR per Ch3 IR Sw.
Turns the FX Loop on and off
Turns the Reverb on and off
Turns the Graphic EQ on and off
PAGE 40
COMMENTS