Westfalia Wetelux 17 92 42 Instructions Manual page 10

4. Clean all parts thoroughly and assemble the pump in reverse order. Now the
pump is ready for use again.
Troubleshooting
If no water is pumped after several sunny days with direct sunlight, please
check the following possible causes:
 The pump is clogged,
 The solar module is dirty.
Cleaning the Solar Module and the Bowls
 Clean the solar module with a dry or lightly moistened cloth only. Treat the
solar module as glass product. Do not immerse the solar module in liquids.
 Clean the bowls with water and if desired with less detergent.
 In order not to damage the surfaces, do not use aggressive chemicals or
abrasives for cleaning all products.
Storing
During winter time remove the pump out of the water and store it at a warm
place. The solar module can remain outside.
The bowls are frost resistant, but we still recommend emptying the fountain
during winter time and storing it in a dry place without water.
Special Accessory
The special accessories [different sprinklers (a), nozzle
(b), cup
(4x d), rise pipe adaptor (e)] that are part of the solar
pump will not be used in combination with this cascade
fountain. The accessories can only be used if you intend
to operate the solar pump outside the cascade fountain
as garden pond fountain for example.
1. For mounting the fountain use one or all rise pipes (d)
and the cup piece (c). Mount the rise pipe adaptor on
the bottom part of the rise pipe.
2. The set includes different sprinklers (a) and a nozzle
(b) which can be inserted into the cup piece (c). The
nozzle can be inserted directly on the rise pipe.
3. Attach the already assembled rise pipe to the pump. According to the
attached sprinkler you will get different water jet images.
piece (c), rise pipe
10
a
b
c
d
d
e