Table of Contents
Advertisement
WARNING:
could result in death or serious injury.
• This device is intended to restrict access by young children to the
contents of a cabinet or drawer, but some children may still be
able to defeat it.
• ALWAYS use the screws provided to install the latches. NEVER
rely on the adhesive pads without screws.
• DO NOT use this product to guard against toxic and dangerous
substances, or sharp-edged or pointed objects. Such objects
should be placed out of the reach of children.
INSTALLATION
Tools Needed: Phillips Head
Screwdriver, Pencil
Cabinet Door Installation
1. Determine position for door
latches. Position the latch on
the inside of the cabinet door
near the edge of the cabinet.
Your ideal location can be
at the door side or the top
edge. 1
2. Clean and dry the surface
thoroughly where you plan to
place the latch and catch.
3. Remove adhesive backing
on the latch, stick into
position, press and hold for
10 seconds.
NOTE: For best performance, the mounted adhesive must be left
to fully adhere for 48 hours before first use.
4
CABINET & DRAWER LATCHES
Failure to follow these warnings and instructions
LATCH
1
SCREW X4
CATCH
Advertisement
Table of Contents
