Table of Contents
Advertisement
2-PACK FURNITURE WALL ANCHORS
WARNING:
could result in death or serious injury.
• Secure Furniture by fastening/anchoring the restraint to a wood
stud in the wall. ALWAYS use 1 set (2 anchors) of the Furniture
Wall Anchors for each piece of furniture to be anchored.
• Wall Anchors MUST be positioned on a wall stud to properly
secure furniture.
• Frequently check to assure that the anchoring screws are
securely installed.
• Visit CPSC.GOV to learn all about the Anchor It! public service
announcement on TV and Furniture tip-overs.
• This product is not a substitute for proper adult supervision.
Manufacturer assumes no liability for improper installation or
excessive loads placed on screws, brackets or straps.
INSTALLATION
Tools Needed: Phillips Head Screwdriver, Power Drill with 1/8" Bit,
Measuring Tape, Stud Finder, Pencil
FURNITURE-TO-WALL STUD INSTALLATION
1. Using a stud finder tool, locate the 2
wall studs behind your furniture.
NOTE: Studs are typically 16" apart
on center.
Mark your stud locations with a
pencil approximately 1" inch below
the top of the furniture. This is the
height/ location for the wall brackets
to be installed. Using the brackets,
mark the wall through the 2 holes for
each anchor. (Total = 4 marks)
14
Failure to follow these warnings and instructions
1
(a)
(a)
Advertisement
Table of Contents
