Advanced Media Control; Auto Tray Change; Media Check; Express Print - Oki B710n User Manual

Advanced Media Control

Auto Tray Change

When an input tray runs out of paper, auto tray changing enables
the printer to switch to another available tray that contains the
same Media size and type.

Media Check

Controls whether or not the paper size and media type specified
in the print job must be used to satisfy the print request.
When both Auto Resize and Media Check are enabled, Auto
Resize overrides Media Check in regard to paper size.
To force a specific paper size, disable Auto Resize in the printer
menu (under Admin Setup > Print Menu).

Express Print

To use Express Print, you must disable Media Check. You can use
the driver to do this.
When the printer is in Express Print mode, you can leave the default media
settings as is in the printer, and it will assume the paper you put in the tray
and selected in your driver is the correct size and type for the print job.
This allows you to switch between paper sizes easily without configuring
custom paper sizes at the printer. It is up you to load the correct
media in the designated tray.
B710, B720, B730 User's Guide > 39