Usb; Sw (Rotary Switch); Normal Mode - Advantech AMAX-3100 Series Hardware User Manual

8 NC
9 NC

2.10 USB

USB port of AMAX-3100 supports the host type for FW updating, APP updating ,
and path table.
[Note]. The following notes are about USB using to update FW and APP
1. AMAX-3110 supports USB 2.0 and USB 3.0
2. USB disk must format as FAT32 before updating
3. The FW or APP file must put in root folder.

2.11 SW (Rotary Switch)

[Note]. Turn off AMAX-3100 before changing the switch.
State Mode
0 Normal
1 FW Update
2 Configuration
3 Factory reset

Normal Mode

2.11.1
The normal mode is execution and the RUN LED blink at 0.5 intervals when select
zero on the switch. If errors occur, RUN LED will light out and ERR LED light on.
No Connection
No Connection
Description
Default
Update Firmware
Update ARES programs or configuration settings
Factory reset
23
AMAX-3100 用戶手冊