Setup A Connection - Riedel MediorNet TDM 7.2 User Manual

3.5.6

Setup a Connection

To create connections:
·
Click the System Explorer shortcut button in the Dashboard.
or
·
Select the menu Operation --> System Explorer.
figure 241: system explorer (split view)
·
Left-click on a net --> frame --> card --> channel (--> sub-channel) in the input area.
·
Left-click on a net --> frame --> card --> channel (--> sub-channel) in the output area.
Selections are indicated by a blue background.
·
Click the
or
·
Press CTRL-C on the keyboard.
The connection is established and activated from the input (sub-)channel to the output (sub-)channel. The
connection is indicated by the
Connections window.
258
At first, check that the layout of the System Explorer is set to
window shows in the upper section all input devices and in the lower section all output devices.
Connections can be also created in the
the respective entries.
button.
The button is only enabled if the input and output are compatible. Otherwise, the
button is disabled and it is not possible to create a connection.
icon on the right side of the (sub-)channel name, as well as in the
Source and destination must be in the same net.
Split view. In this mode the
Single view. In this case press the CTRL key to select
MediorNet TDM 7.2 User Manual I00