Dust Collection - Grizzly T33304 Owner's Manual

Assembly
Assembling the Model T33304 consists of
mounting the motor on the plunge base.
To assemble tool:
1. Loosen router base lock knob on
router plunge base (see Figure 10).
2. Install router motor on plunge base
by aligning router motor guides with
router base channels and pressing
motor into base (see Figure 10).
3. Tighten router base lock knob to
secure router motor in place.
Router
Motor
Router
Guides
(1 of 4)
Router
Plunge
Base
Figure 10. Plunge base assembled on
router.
-12
-
This tool creates a lot of wood chips/
dust during operation. Breathing
airborne dust on a regular basis can
result in permanent respiratory ill-
ness. Reduce your risk by wearing
a respirator and capturing the dust
with a dust-collection system.
The Model T33304 is supplied with a 1
dust port that can attach to a dust collec-
tion system or shop vacuum.
To connect to dust collection system:
1. Loosen dust port lock knob and slide
Router
Base
Channel
2. Fit 1
Router
Base
Lock
Knob
Dust Port
Lock Knob
3. Tug hose to make sure it does not

Dust Collection

dust port clip and dust port into posi-
tion, then tighten knob (see Figure 11).
⁄ " hose over dust port and
1
2
secure in place with hose clamp
(see Figure 11).
Dust Port
Clip
Figure 11. Dust port installed.
come off.
Note: A tight fit is necessary for proper
performance.
Model T33304 (Mfd. Since 05/22)
⁄ "
1
2
Dust Port
Dust Hose
Attach Point