Charging The Battery - Oakley THUMP PRO User Manual

CHARGING THE BATTERY

Battery life depends on many things, including volume level, external temperature and the format of the audio files. Under
ideal conditions, the internal battery will provide approximately 6 hours of continuous playing time. If THUMP Pro hasn't been
used for a while, the battery may need charging. The small indicator light (on the inner side of the right stem) will blink red
when the remaining battery power is less than 20%. When the battery is low, you will hear warning tones between songs
and during songs with more than 10 minutes remaining.
Charge the internal battery by connecting THUMP Pro to your computer or the optional Wall Charger or Car Charger.
• For charging with your computer, the computer must be turned on and cannot be in Sleep or Suspend mode.
• For charging with an optional Wall Charger, make sure the charger is plugged into a working electrical outlet.
THUMP Pro will be 80% charged after 1 hour, but a full 3-hour charge is recommended. When THUMP Pro is fully charged,
the small indicator light will turn solid green.
With the included USB cable, connect THUMP Pro directly to the USB port on your computer. Leave it connected for 3 hours.
Connect the included USB cable directly to
the USB port on your computer. Make sure
your computer is powered on.
Connect the other end of the USB cable to
THUMP Pro.
Allow to charge for a minimum of 3 hours
(until the indicator light turns solid green).
USB PORT
13
THUMP PRO USER GUIDE