Advertisement
If indicators illuminate...
■ Filter indicator < 过滤网 >
Status
The fi lter is clogged
Situation
or the environment or inside of the projector is very hot.
●
Check
●
Solution
Status
Situation
No air fi lter unit is installed
●
Check
●
Solution
Note
If the fi lter indicator < 过滤网 > still illuminates or fl ashes even after doing the above, contact your
●
dealer for repairs.
If the fi lter is clogged, even if [LAMP SELECTION] is set to [DUAL] only one lamp may illuminate
●
in some cases. This is resolved by replacing the fi lter with a new one.
■ Disposal
When discarding this product, please contact your local authorities or dealer and ask for the
correct method of disposal.
:
日本福冈县福冈市博多区美野岛四丁目1番62号
:
https://panasonic.cn/
:
©
松下互联株式会社 2022版权所有
Filter indicator < 过滤网 >
开 （绿） /
灯泡
温度
待机 （红）
Is the smoke cut fi lter dirty?
Replace the smoke cut fi lter.
(
page 2)
Is an air fi lter unit installed?
Install an air fi lter unit.
2022
:
4
过滤网
Illuminated red
Is the air intake/outlet
●
blocked?
●
Remove the object
blocking the air intake/
outlet.
Flashing red
●
If a smoke cut fi lter is installed, is the
[FILTER TYPE] correct?
If a smoke cut filter is installed, set the
●
[FILTER TYPE] to [SPECIAL].( ➡ page 3)
Is the projector being used
●
more than 1 400 m (4 593')
above sea level?
●
Use the projector in a
location lower than 1 400 m
(4 593') above sea level.
SS0613AM1042 -PS
Printed in Japan
Advertisement
