Page 1
ET-SFD320C (Replacement Filter) ET-SFR320C Thank you for purchasing this Panasonic product. ■ Carefully read through these operating Instructions and the operating instructions of the projector to ensure safe and proper operation. ■ Please save this Operating Instructions for future use.
Page 2
Attention z Turn the main power of the projector off before replacing the smoke cut filter. z Make sure that the projector is stable when attaching the smoke cut filter, and work in an environment that is safe, even in the event of the smoke cut filter dropping. Removing the air filter unit 1) Turn off the projector and disconnect the power plug from the wall outlet.
Page 3
Attention z Be sure to install the air filter unit or smoke cut filter before turning on the projector. Using the projector with- out the air filter unit or smoke cut filter will cause dirt and dust to accumulate inside the projector and could result in malfunction.