Advertisement
Thank you for purchasing this Panasonic product.
■ Please read these operating instructions and the projector operating instructions
carefully, and then use this product correctly.
■ Before using this product, be sure to read "Read this first!" (
■ Please save this manual for future use.
■ When installing the smoke cut filter to projector models other than the PT-RQ13K
series, PT-RZ12K series, and PT-RS11K series, refer to the Operating Instructions
supplied with the projector.
Operating Instructions
Smoke Cut Filter
Model No.
Commercial Use
ET-SFR330
ENGLISH
FRANÇAIS
Page 2).
ENGLISH
TQZJ724-2
Advertisement
Table of Contents
Related Manuals for Panasonic ET-SFR330
Summary of Contents for Panasonic ET-SFR330
-
Page 1: Operating Instructions
Model No. ENGLISH FRANÇAIS Thank you for purchasing this Panasonic product. ■ Please read these operating instructions and the projector operating instructions carefully, and then use this product correctly. ■ Before using this product, be sure to read “Read this first!” ( Page 2). - Page 2 █ Contents Read this first! ..................2 Switching the filter ................3 Before switching the filter ................ 3 Removing the air filter unit............... 3 Installing the smoke cut filter ..............4 Smoke cut filter replacement cycle ............5 If the indicator lights................6 Read this first! Always follow these precautions CAUTION:...
- Page 3 Switching the filter Before switching the filter This filter should be attached when using the projector at stage events or other venues where smoke may be generated. Switch the air filter unit that is standard-equipped on the projector with this filter in such cases. Attention z Turn the main power off before switching the filter.
- Page 4 Switching the filter (continued) Attention z Take care not to touch the air intake fan in the air filter unit compartment when removing dirt or dust. z Keep the air filter unit in a safe place after removal. Installing the smoke cut filter Projector tabs Filter compartment Arrow...
- Page 5 Switching the filter (continued) 5) Select [SERVICE PASSWORD] in the [PROJECTOR SETUP] menu and press the <ENTER> button. 6) In the [SERVICE PASSWORD] entry screen, enter "1111" using the numeric buttons on the remote control and then press the <ENTER> button. 7) In the [AIR FILTER] screen, use the q and w buttons to switch the [FILTER TYPE] setting from [NORMAL] to [SPECIAL].
- Page 6 Prolonged operation without replacement of the smoke cut filter may reduce the lifespan of parts and result in malfunctions. z If the <FILTER> indicator still lights or flashes, even after doing the above, contact your dealer for repairs. Panasonic Corporation Web Site : https://panasonic.net/cns/projector/ © Panasonic Corporation 2015 SS0815NK2127 -PJ Printed in Japan...
Need help?
Do you have a question about the ET-SFR330 and is the answer not in the manual?
Questions and answers