Minimum Clearances; Preparing For Installation; Transportation Storage And Lifting - Bosch Compress 3400i AWS Installation Manual

Preparing for installation

3.10

Minimum clearances

1
2
100
3
100
Fig. 4 Minimum clearances (mm)
[1] Front view
[2] Top view
[3] Top view with sound hood (dashed line)
[a] Air inlet
[b] Air outlet
[*] Recommended in locations with heavy snow
8
600
300*
a 175
500
b
1000
a
175
450
500
b
1000
450
0010035828 -003
4 Preparing for installation
CAUTION
Risk of injury!
During transport and installation there is a risk of crushing injury. During
maintenance, internal parts of the appliance may become hot.
▶ The installer is obliged to wear gloves during transport, installation
and maintenance.
CAUTION
Risk of fire or explosion!
All possible ignition sources must be kept away from the installation site
as it may lead to fire or explosion.
▶ This appliance must be stored in a room without continuously
operating ignition sources (e.g. open flames, cigarette smoking, an
operating gas or operating electric heater).
4.1

Transportation storage and lifting

NOTICE
The outdoor unit must be kept in the packaging during
transportation.
To prevent damage on the outdoor unit:
▶ Transport and store upright.
▶ Do not lean by more than 45º angle.
▶ Do not transport or store when temperatures are below -20 °C or over
60 °C.
The outdoor unit must be lifted using a standard lifting equipment with a
minimum 150kg lifting capacity. The centre of gravity marked in the
package should be considered for this purpose.
Fig. 5 Package with marked centre of gravity
Compress 3400i AWS – 6721825369 (2021/11)
0010036813-001