Download Print this page

HEIDENHAIN ECN 1313 Mounting Instructions page 2

Advertisement

Kundenseitige Anschlussmaße (mm)
Required mating dimensions (mm)
Conditions requises pour le montage (mm)
Quote per il montaggio (mm)
Cotas de montaje requeridas (mm)
WELLA1: 67B
WELLA1: 67E
† †
œ ¬
WELLA1: 67M
WELLA1: 67C
† †
œ ¬
X
X
Montage
A
Assembly
Bearing
Montage
Montaggio
Cuscinetto
Montaje
† ‡
œ ¬
1.
3.
Demontage in umgekehrter Reihenfolge
Disassembly in reverse order
Demontage dans l'ordre inverse
œ ¬
Smontaggio in sequenza inversa
Desmontaje en orden contrario
5.
Check the resistance between the flange socket and rotor. Nominal value: < 1 ohm
Verificare resistenza elettrica tra flangia e rotore. Valore nominale: < 1 Ohm.
Comprobar la resistencia eléctrica entre el conector base y rotor. Valor nominal: < 1 Ohm
Do not remove threadlocker
Non rimuovere il frenafiletto
2.
WELLA1: 67B
M5x16
WELLA1: 67M
M5x25
WELLA1: 67E/C
M5x20
M
d
4.
M
d
< 1 W
Warnhinweise
Warnings
Recommandtions
Avvertenze
Advertencias
Achtung:
Note: Mounting and commissioning is to be conducted by a qualified specialist
under compliance with local safety regulations.
In addition to this, the machine manufacturer or designer himself must define the
other data required for final assembly (e.g. tightening torque, anti-rotation lock for
screws required or not) for the respective application.
Mounting surfaces and screws must be clean and free of grease.
Do not engage or disengage any connections while under power.
The system must be disconnected from power.
Attention:
Attenzione: Il montaggio e la messa in funzione devono essere eseguite da
personale qualificato nel rispetto delle norme di sicurezza locali.
Inoltre, il costruttore della macchina deve definire le ulteriori procedure necessarie
per completare il montaggio (ad esempio: coppia di serraggio, sicurezza
allentamento viti sì/no) di ogni specifica applicazione.
Superfici di montaggio e vite devono essere pulite e libere da grasso.
I cavi possono essere collegati o scollegati solo in assenza di tensione.
L’impianto deve essere spento!
Atención:

Advertisement

loading

This manual is also suitable for:

Eqn 1325