Table of Contents
Advertisement
Quick Links
®
RESCUE EcoTech
Condenser Fan Motor
Installation and
Troubleshooting Manual
For technical assistance or questions
®
related to your RESCUE EcoTech
Condenser Fan Motor
®
call the RESCUE EcoTech
Condenser Fan Motor hotline
1-888-540-5540
Read the entire manual prior to installation of the
®
RESCUE EcoTech
Condenser Fan Motor.
Follow all instructions contained herein.
M01812028
Advertisement
Table of Contents
Related Manuals for Nidec RESCUE EcoTech
Summary of Contents for Nidec RESCUE EcoTech
- Page 1 RESCUE EcoTech Condenser Fan Motor Installation and Troubleshooting Manual For technical assistance or questions ® related to your RESCUE EcoTech Condenser Fan Motor ® call the RESCUE EcoTech Condenser Fan Motor hotline 1-888-540-5540 Read the entire manual prior to installation of the ®...
-
Page 2: Table Of Contents
Table of Contents Important Safety Information ..................2 Product Overview ......................5 Key Features and Benefits ..................5 Specifications ......................5 Motor Pictures ......................6 Shaft Down, Shaft Up ..................6 General Information ....................6 Initial Inspection ..................... 6 Handling & Care .................... 6 Motor Installation .................... -
Page 3: Important Safety Information
Important Safety Information Use only specially designed motors where explosive atmospheric hazards exist. See the National Electrical Code (NEC) Article 500 or check with local codes for explanation of hazardous or classified atmospheres and locations. Unless the motor is specifically marked “ELECTRIC MOTOR FOR HAZARDOUS LOCATIONS,” it is not suitable for use in Class I or II hazardous locations as defined by the NEC. - Page 4 The control unit on the motor contains potentially hazardous voltage. These instructions provide field technicians a guide for installing a RESCUE EcoTech ® Condenser Fan Motor and are intended for a typical household air conditioning/heat pump system. These instructions do not override or replace any instructions provided by the HVAC system manufacturer.
- Page 5 RESCUE EcoTech Condenser Fan Motor is designated for continuous, air-over duty, and must be mounted in the air stream of an air moving device, such as a fan. DO NOT operate the RESCUE EcoTech ® Condenser Fan Motor outside of the air stream as that may overheat and damage the motor.
-
Page 6: Product Overview
Product Overview The RESCUE EcoTech ® Condenser Fan Motor is developed to stand up to harsh environments and temperatures found in outdoor condensing units. The RESCUE EcoTech ® Condenser Fan Motor provides the efficiencies required for high SEER air conditioning systems. -
Page 7: Motor Pictures
Motor Pictures Shaft Down Shaft Up General Information Initial Inspection Check the RESCUE EcoTech ® Condenser Fan Motor to verify that: The shaft should turn freely by hand. The nameplate data conforms to specifications of motor ordered. Handling & Care ... -
Page 8: Motor Installation
Motor Installation These instructions provide field technicians a guide for installing a RESCUE EcoTech ® Condenser Fan Motor and do not override or replace instructions by the HVAC system manufacturer. STEP ONE: Turn OFF power STEP TWO: Remove existing fan motor from the condensing unit a. -
Page 9: Motor Start-Up & Operation
Motor Start-Up & Operation START UP & OPERATION CHECKLIST Following installation, motor operation should be tested in all system modes for the following: Unusual noises and vibration – If unusual noises or vibration is detected refer to the Troubleshooting section. ... -
Page 10: Troubleshooting
Blue lead not connected for 24V Common when 825 rpm the wrong rpm is required. Yellow lead should have 24V for 825 rpm. Yellow lead should have no voltage for 1075 rpm. For Technical Assistance call the RESCUE EcoTech ® Condenser Fan Motor OUTDOOR Hotline: 1-888-540-5540... -
Page 11: Warranty Information
Warranty Information LIMITED WARRANTY Nidec Motor Corporation (NMC) extends the following LIMITED WARRANTY to the purchaser and to its customers (collectively referred to as the “Purchaser”) of the enclosed motor and components: the motor and components are free from defects in materials and workmanship under normal use, service and maintenance FOR A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE FROM NMC OR THE NMC DEALER/RETAILER, NOT TO EXCEED 30 MONTHS FROM THE DATE OF MANUFACTURE BY NMC. - Page 12 †All marks shown in this document are properties of their respective owners. For more information © 2016 Nidec Motor Corporation. All rights reserved. U.S. Visit us at www.nidec-motor.com ® ® Motors and RESCUE EcoTech are registered trademarks of Nidec Motor Corporation.