Valex WMiscel Safety Instruction page 8

f) Keep tools sharp and clean cut (if any).
Cutting tools in a well maintained condition
and with sharp cutting edges are less likely to
get stuck and are easier to control.
g) Use the power tool, accessories... in
accordance with these instructions, taking
into account the working conditions and the
operation to be performed. The use of the
power tool for operations different from those
intended could result in a hazardous situation.
h ) Support tool with insulated handles when
you make a transaction during which the wor-
king body can come in contact with hidden
wiring. The bodies of work coming in contact
with a "supply" conductor can put "live" the
metal parts of the power tool and cause an
electric shock (electrocution) operator.
i) Maintain a safe distance from moving parts.
Touch moving parts causing serious injuries.
l) Do not modify the power tool. Remove,
replace or add components not covered by
the instructions is prohibited and will void the
warranty.
m) Do not leave the power tool on. Turn it off
before leaving it unattended to prevent possible
accidents.
n) The power tool must never come in contact
with water or other liquids. The use of these
terms may result in electric shock.
5) Support
a) Making perform maintenance on power
tools by a qualified technician using only
original spare parts. This will help to maintain
the safety of the power tool.
b) Do not groped to repair the power tool or
access to internal organs. Interventions car-
ried out by unqualified and unauthorized by the
Manufacturer can create serious hazards and
void the warranty.
c) Request only original spare parts. The use of
unauthorized parts can compromise the safety
of the power tool.
- 8 -
SAFETY OF MIXER
1) Security
a ) Wear ear protectors when using the tool.
Exposure to noise can cause hearing loss.
b) Use the handle/s supplied with the tool. Loss
of control can result in injury.
c) Maintain a safe distance from all moving
parts.
d) Before inserting or removing the whip from
the chuck, pull the plug. Any maintenance
must be in place to prevent accidents caused
by a sudden start.
e) If the tool crashes during use, turn it off
immediately. Do not force with heavy opera-
tions for the tool.
f) Hold the tool firmly. Efforts cause stress
caused by work that is necessary to fight with
your strength .
g ) Wait for the complete shutdown of the
power tool before placing it. Moving parts
can cause it to fall.
h) Warning! Start only if the whip is inside
the container and immersed in the material
to be mixed.
i) Warning! Do not place your hand or feet in
the container during use. Carefully operate
the mixer by keeping it away from the legs,
clothing, and power supply cord.
SAFETY INSTRUCTIONS FOR THE NOISE
AND VIBRATIONS
The level of noise and vibration levels shown in
the attached sheet are average values of use of
the tool. The use of different mixing elements,
different materials, the absence of electric tool
maintenance have a significant influence in the
noise emissions and vibrations. Consequently
taken all preventive measures to eliminate pos-
sible damage due to high noise and stress from
vibration, wear ear defenders, anti-vibration glo-
ves, made of breaks during the work, maintain
efficient power tools and accessories.