Coway Airmega 200M Manual page 4

SAFETY INFORMATION
DANGER :  F ailing to follow the precautions below may result in serious
injury or even death.
Do not use a damaged power plug or loose electric outlet.
 P lease connect the power plug to a dedicated grounded electrical outlet for
220 V – 240 V~ 50 Hz, 60 Hz.
 D o not move the product by pulling only the power cord.
 D o not handle the power plug with wet hands.
 D o not forcefully bend the power cord or place it under a heavy object to
prevent it from being damaged or deformed.
 D o not repeatedly connect and disconnect the power plug.
 I f the electrical outlet is wet, carefully unplug the product and let the
electrical outlet dry completely before subsequent use.
 M ake sure to unplug the product be fore repairing, inspecting or replacing
a part.
 R emove any dust or water from the power plug.
 D o not plug the product into an electrical outlet or power strip that is being
used by several other appliances. Use an electrical outlet dedicated to the
product.
 U nplug the system if it is not used for a long time.
 D o not attempt to repair or modify the power cord yourself.
 I f the power cord is damaged, do not replace the cord yourself. 
Call a service center to have it replaced.
 D o not install the product near a heating device.
 D o not install the product in locations exposed to moisture or water
(rainwater).
 D o not use the product in areas where flammable gases or combustible
materials are used or stored.
 D o not insert sharp objects such as a gimlet into the Air quality sensor.
03