SeeEyes SC-HOC01S User Manual

3g, hd-sdi, ex-sdi1.0 optical extender

Advertisement

Quick Links

3G, HD-SDI, EX-SDI1.0 Optical Extender
SC-HOC01S
User's Manual
Precaution and Safety Guidelines
The content of this guideline is to protect the safety of users and prevent property damage.
Be sure to read this user's manual thoroughly and use the device correctly.
Warning
(If you do not keep any of the below guidelines, you may get seriously injured or
cause somebody's death.)
■ Do not disassemble the device arbitrarily as its exclusive adapter has electric shock hazard.
■ Disconnect the power cord if the device is not in use.
Avoid direct sunlight, high temperature, high humidity and low temperature. Place the device in well
ventilated site.
■ Strong shock or vibration may cause device failure, so use with caution.
■ Do not open the lid arbitrarily as this device has high voltage part inside. Never disassemble, repair or
modify it.
- By abnormal working, it may cause fire, electric shock and personal injury.
■ Avoid installing near strong magnetic fields or radio waves and wireless devices such as radio or TV.
■ If rain, coffee or foreign substances entered the device, fire or electric shock may occur in the event of
smoke or smell. Unplug the power cord immediately and contact the place of purchase or service center.
■ Always keep the location of the appliance clean during or after installation to prevent dust. Especially
when cleaning the device, wipe it with dry towel and do not use water, thinner or organic solvent.
■ Keep the device in a cool place where doesn't let direct sunlight. Keep it at a proper temperature and
avoid heating appliances like candle or heater. Also, keep the equipment or tools away from places where
people come and go.
- It may cause fire.
■ Pay attention to possible hazards in the workplace, such as wet floor, ungrounded power extension
cables, old power cords and a lack of safety earth. Consult your place of purchase or professional if
problems arise.
- It may cause abnormal heat, fire and electric shock.
Concerning the input voltage for operating this device, a voltage range must be within 10% of rated
voltage, and the power outlet must be grounded. Also, do not use a heat source such as a hair dryer, iron
and refrigerator to the same power unit.
- It may cause abnormal heat, fire and electric shock.
Release Version 1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC-HOC01S and is the answer not in the manual?

Questions and answers

Summary of Contents for SeeEyes SC-HOC01S

  • Page 1 Release Version 1.2 3G, HD-SDI, EX-SDI1.0 Optical Extender SC-HOC01S User’s Manual Precaution and Safety Guidelines The content of this guideline is to protect the safety of users and prevent property damage. Be sure to read this user’s manual thoroughly and use the device correctly.
  • Page 2 1. Introduction 1-1. Overview SC-HOC01S is a compact type module that transmits 3G, HD-SDI, EX-SDI 1.0 video signal by optical cable. This product consists of Transmitter and Receiver, and can transmit 3G, HD-SDI, EX-SDI 1.0 signal by optical cable with minimum loss. The transmitter converts 3G, HD-SDI, EX-SDI 1.0 signal into optical data, and the receiver converts optical data received from optical cable into 3G, HD-SDI, EX-SDI 1.0 signal.
  • Page 3: Product Parts And Peripheral Device Connection

    Release Version 1.2 2. Components Transmitter Receiver User’s Manual DC incoming line 3. Product Parts and Peripheral Device Connection 3-1. Transmitter ⑤ ③ ① ④ ② ① HD-SDI INPUT: 3G, HD-SDI, EX-SDI1.0 signal input port. ② SIGNAL LED Status Indicator LED Status Status Indicator RED ON...
  • Page 4 Release Version 1.2 3-2. Receiver ⑤ ③ ④ ① ② ① HD-SDI OUTPUT: 3G, HD-SDI, EX-SDI1.0 signal output port. ② SIGNAL LED Status Indicator LED Status Status Indicator RED ON Optical Input ON RED OFF Optical Input OFF ③ POWER LED Status Indicator LED Status Status Indicator RED On...
  • Page 5: Troubleshooting Method

    Release Version 1.2 4-2. Optical Cable Transmission Distance Single mode fiber Multi mode fiber (SM G.657B3) (MM50 / 125um OM3) EX-SDI 270Mbps 20Km FULL HD 1.5Gbps 20Km FULL HD 3Gbps 20Km 700m 5. Trouble Shooting Method Condition Check Method • Check the adapter input status. The power is not on.
  • Page 6: Specifications

    Release Version 1.2 6. Specifications Model No. Transmitter Receiver Input 3G, HD-SDI, EX-SDI1.0 Optical Output Optical 3G, HD-SDI, EX-SDI1.0 Power Input DC12V / AC24V DC12V 104mA / DC12V 87mA / Current Consumption AC24V 88mA AC24V 77mA EX-SDI 270Mbps : 20Km Single mode fiber Full HD 1.5Gbps : 20Km Optical Fiber...
  • Page 7: Warranty Certificate

    Release Version 1.2 7. Warranty Certificate Product No. Model No. Date of Purchase Place of Purchase Name Purchaser Address & Contact No. Name Distributor Address & Contact No. Warranty Period Two(2) years from the date of purchase Any failure that occurs in the normal use for only two years after purchase will be repaired free of charge.
  • Page 8 Release Version 1.2...

Table of Contents