Table of Contents
Advertisement
10. To verify that the onboard RTL8139C Controller has been set up in
system, please click "Start", then "Control Panel", then "Network".
11. In the "Network" screen, click the "Adapter" bar. You can now see
the "Realtek RTL8139(A/B/C/8130) PCI Fast Ethernet Adapter is
already installed in system.
3-8-3. RTL8139C LAN driver on Win ME / 2000 / XP
1. When you newly install Windows ME , Windows 2000or windows
XP, the system will detect the LAN Controller on board and configure
it automatically into system. Therefore, users need not bother to
install the LAN controller into these operating systems.
2. To verify the existence of RTL8139C Controller and Driver, please
enter the "Control Panel" of your system and click "Network" to open
the "Configuration" screen. You can then see the "Realtek8139 (A/
B/C) PCI Fast Ethernet Adapter" is already installed in system.
Chapter 3 Software Setup
53
Advertisement
Table of Contents
