2-8.6 Jagp1 & Jagp2: Agp Voltage Select - SOLTEK 85LIR2 Manual

85LIR2 / 85LIR2-L
2-8.6 JAGP1 & JAGP2: AGP Voltage Select
The default voltage 1.5V at the whole AGP Interface is for normal op-
eration of the AGP interface. In some case, when you try to do CPU
overclocking, you then may also need to raise the transfer rate of the
AGP interface. JAGP1 & JAGP2 are designed on board to provide
settings for selecting a higher AGP Interface voltage so as to raise the
speed of the AGP interface.
Warning: Selecting a higher voltage than the default ,
you are risking the stability of your system.
JAGP1 & JAGP2:
AGP Voltage Select
AGP
Jumper Setting
Voltage
JAGP1 1-2
1.5V
JAGP2 1-2
(default)
JAGP1 1-2
1.6V
JAGP2 2-3
JAGP1 2-3
1.7V
JAGP2 1-2
30