Other Connectors Configuration; 2-9.1 On Board Fan Connectors - SOLTEK 85LIR2 Manual

2-9 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-9.1 On Board FAN Connectors

JP3
PS/2 Mouse
(on top)
1 3
PS/2 K/B (underside)
Rj 45
(on top)
USB0 (middle)
USB1 (underside)
+12V Power
1
JP8
1
1
Peripheral Power
FAN2
1
AGP1(for DVO only)
RTL8139C
1
CD1
AUX1
1
ALC202A
AC'97
Audio
1
These fan connectors support CPU/AGP/System cooling fan with
+12V. When connecting the wire to FAN connectors, users should make
sure that the red wire is for the positive current and should be con-
nected to pin +12V, and the black wire is Ground and should be con-
nected to pin GND. If your mainboard has Hardware Monitor chipset on
board, you must use a specially designed fan with speed sensor to take
advantage of the monitoring function.
For fans with speed sensors, each rotation of the fan blades will send
out 2 electric pulses, By counting the pulses, System Hardware Moni-
tor will work out the fan rotation speed and display the result on the
scree.
NOTE : 3 "Yellow" fan connectors are used on this series to mark that
they support fan speed sensor function. (White fan connector does not
support sensor function.)
1
FAN1
RT2
i845GV
Intel
PCI 1
JAGP1
Jp11
1
1
JAGP2
Intel
PCI 2
IT8712F
LPC I/O
ICH4
CN14
PCI 3
1
USB2 USB3
FAN3
10 10
DCOM1
1
1
1
Chapter 2 Hardware Setup
GND
+12V
SENSOR
Sensor Conn.
1 1
1
FAN1, sensor Fan Connector
(yellow)
JBAT1
1
FAN2, Sensor Fan Connector
(yellow)
FAN3, sensor Fan Connector
(yellow)
31
Void
+12V
GND
No Sensor