Page 1
ASSEMBLY INSTRUCTIONS SHELF UNIT JB3TRBLSR...
Page 2
Tools Required Hardware List PARTS INVENTORY CHECKLIST (1) - Short Shelf Supports QTY 6 (2) - Long Shelf Supports QTY 6 (3) - Leg Angle Sections QTY 4 (4) - MDF shelves QTY 3 - Plastic Floor Protectors QTY 8...
Page 3
Decide on the position you require the bottom shelf to be. Fit one short shelf support (1) between two leg angles (3). Repeat this again making sure both short shelf supports (1) are at the same height. Now fit two long shelf supports (2) matching the same height as the two short shelf supports (1).
Need help?
Do you have a question about the JB3TRBLSR and is the answer not in the manual?
Questions and answers