Charging The Battery; Connecting To Your Rg2100; Wi-Fi Name (Ssid) And Password; Connecting To The Internet - JEXtream RG2100 User Manual

Charging the Battery

Before using your mobile hotspot, ensure that the battery is fully charged. Be sure to use the
charger that came with your device.
NOTE: Your RG2100 is equipped with a replaceable rechargeable battery. When handling the
battery or SIM card, please make sure the device is not connected to any power sources. Do not
use any tools, sharp objects or any utensils when dealing with the battery. Doing so may cause
damage that voids your warranty.
•
It normally takes 3~5 hours, depending on your power sources and device status to fully
charge the battery.
•
The battery discharges faster as more devices connect to your mobile hotspot.
•
Battery life depends on the network, signal strength, temperature, features, and active
connection time.
•
When charging, keep your device near room temperature.
•
Never leave the RG2100 in an unattended vehicle due to uncontrolled temperatures that
may be outside the desired temperatures for your device.
•
It is normal for batteries to gradually wear down and require longer charging time.

Connecting to Your RG2100

Wi-Fi Name (SSID) and Password

Main and Guest Wi-Fi Names and Passwords display on the device main screen.

Connecting to the Internet

1 Open the Wi-Fi application or controls on your laptop or Wi-Fi capable device that you want
to connect to your RG2100. Then find your RG2100's Wi-Fi name.
2 Click Connect and enter the Password when prompted.
8