Automatic Mouse Speed And Mouse Synchronization; Host System Mouse Settings - LevelOne ACC-2000 User Manual

Kvm ip console module

Table of Contents

4.2.3 Automatic mouse speed and mouse synchronization

The automatic mouse speed mode performs the speed detection during mouse

synchronization. Whenever the local and remote mouse cursors move synchronously

or not, there are two ways for re-synchronizing local and remote mouse cursors:

Fast Sync

The fast synchronization is used to correct a temporary, but fixed skew. Choose

the option using the Remote Console options menu or press the mouse

synchronization hotkey sequence in case you defined one.

Intelligent Sync

If the fast sync does not work or the mouse settings have been changed on the

host system, use the intelligent resynchronization. This method takes more time

than the fast one and can be accessed with the appropriate item in the Remote

Console option menu. The intelligent synchronization requires a correctly

adjusted picture. Use the auto adjustment function to setup the picture, and make

sure that there are no window at the top left corner of the remote desktop that are

able to change the mouse cursor shape from the normal state. The Sync mouse

button on top of the Remote Console can behave differently, depending on the

current state of mouse synchronization. Usually pressing this button leads to a

fast sync, except in situations where the KVM port or the video mode changed

recently.

Note: At first start, if the local mouse pointer is not synchronized with

the remote mouse pointer, press the Auto Adjust Button once.

The host's operating system knows various settings from the mouse driver.

The following limitations do not apply in case of USB and Mouse Type

"Windows >= 2000, MacOSX".

While the KVM IP Console Module works with accelerated mice and is able to

synchronize the local with the remote mouse pointer, there are the following limitations,

which may prevent this synchronization from working properly:

Special Mouse Driver

There are mouse drivers that influence the synchronization process and lead to

desynchronized mouse pointers. If this happens, make sure you do not use a

special vendor-specific mouse driver on your host system.

Windows XP Mouse Settings

Warning

18 / 87

KVM IP Console Module

Table of Contents